Join the discussion
Write your take first — we'll ask for email only when you're ready to publish.
- Hacker News
- My first computer was an Atari 400, great days. I never played decathlon though, so I didn’t start customising joysticks until later, I think when I had an Amiga. I got a proper arcade joystick and buttons and built them into a box like the x-arcade sticks you can get now, and wired the contacts onto an old keyboard so the computer thought keys were being pressed. Lots of trial and error figuring out which combinations of keys the keyboard controller couldn’t detect together, but it worked really well and got years of use.by lemming
- Back when DDR was still popular with the teens, my dad helped me build a dance pad to play Stepmania on, mostly out of plywood. We hacked up an old keyboard for it (using an Ethernet cable, but certainly not the protocol). Fond memories.by fwip
- I did something similar as a kid on my Commodore 64. When my Quickshot joystick broke (after playing Summer Games and similar), I took it apart - it was then that I realised it was just simple switches - it was a metal dome over a circuit board. I'd re-bend/pop-up the metal dome which would make it work again for a little bit.
Understanding it was switches, with a wire, I worked out & documented the pinout of the DB-9 connector (afterwards, my father showed me it was documented in the C64 manual).
At some point, I took the remote from an cheap broken RC car, and soldered the switches from it to the cable of a broken joystick. I found a switch in my father's parts bin for the fire button. It worked, but it wore out pretty quick - the RC car controllers switches weren't built for gaming use!
I wish I had photos - its long gone.
by raudette - Relatable path here. Fairchild Channel F, the cat chased the pixels around the Bell and Howell console screen. Hid the 2600 box in the garage rafters from my mom to cover up the purchase. My dad made an 2600 controller using big industrial panel pushbuttons for the directions and a sturdy red clicky button, trying for a good Defender controller but panel buttons were just not meant for fast gameplay.by dole
- Love seeing this kind of dedication. Reminds me of the wild contraptions my own father made to fix our ancient NES controllers.by Segv77
- The parallel cable for the keyboard reminded me of a hack I did back in the day, stripping wires from two SNES controllers and connecting them to a DB25 connector to plug into the parallel port of my PC running MAME. The cool thing with the parallel port is that you can control most of the pins individually, so it was pretty trivial to write a driver to send/receive the control messages the SNES controllers expected.by kstenerud
- A fun story, but what really grabbed me was the story he linked to about the author's father, the engineer: https://lostincyberspace.substack.com/p/son-of-a-son-of-aby jamesgill
- I grew up with Atari computers. I liked digital joysticks and hated the analog sticks Apple computers used. So I decided to spread the gospel to my Apple-owning friend. Yes, only one; the rest of us had Ataris.
So I borrowed said friend's analog joystick and measured the resistance between its extreme deflections, took apart an Atari joystick and then soldered resistors into its circuits to simulate full deflection... then got some multi-conductor wire and laboriously soldered it to the tiny pins on a DIP connector, which was what Apple computers used for joysticks. I don't remember if I had to figure out the pinout or found it in the Apple manual.
This all worked, but the connector was too fussy and fragile to be practical. Funny how much stuff you could learn in a reasonable time with no Internet, no car, no access to an electronics clearinghouse like Mouser...
I must have gotten all of it from Radio Shack on my bike. I wrote the whole procedure up and submitted it to Compute! magazine, but I don't remember what their response was. They probably concluded that not enough people hated analog joysticks enough to go through all that trouble.